How to apply NicoBloc

How to apply NicoBloc...

How to apply NicoBloc

When applying more than one drop at a time, you should follow the steps described one by one.That is to say you should not apply all the drops without following the 4 steps below.

Step 1

Make a deep indentation into the cigarette filter with the bottle nozzle.

Step 2

Squeeze the correct amount of NicoBloc fluid into the filter immediately before you smoke it. Follow the complete application process 2 or 3 times as required, applying one drop each time, rather than applying double or treble size drops. Allow each drop to soak in before applying the next drop.

Step 3

Use the nozzle to spread the fluid, so that it covers the total filter surface.

Step 4

Squeeze the filter a few times, this helps it to absorbe the fluid.

Step 5

Light the cigarette and immediately take a strong first draw, before smoking the cigarette as normal.

Note :
The NicoBloc solution should be applied to the filter immediately prior to smoking.
It should not be applied to all the cigarettes in the pack at the same time.
The solution remains active for about 5 minutes after being applied.
Thereafter, it dries out and becomes ineffective.

©2014 NicoBloc Plc.